Sika Latex


SikaLevel-30 Latex Ultra is an high strength rapid setting cement based powder, which when mixed with water, can be used to level out uneven floors and screeds. SikaLevel-30 Latex Ultra may be overlaid with common floor coverings or may be left as a final wearing surface. SikaLevel-30 Latex Ultra will even accept light vehicular traffic.

  • SikaLevel-30 Latex Ultra may be applied in one coat from 2-10mm in depth (25mm when filled). Typical surfaces include concrete and screeding, existing unglazed ceramic tiles, brick, stone etc.
  • When mixed as directed, the compound provides a free flowing mix that may be walked on in 2 hours and can be overlaid with ceramic tiles after only 3 hours at normal temperatures.
  • NOTE: when overlaying with other floor coverings allow 24 hours drying time for each 10mm depth. Tested to EN13813 Class CT – C30-F7-AR 0.5.
  • Sika Injection 29 New Type N And LP


    Sika® Injection-29 New Type N and Type LP are solvent-free two component injection resins which swell in contact with water. These products can be accelerated by adding a third component.

  • Type N (= Normal Potlife) is used for temperatures between +5°C and +30°C.
  • Type LP (= Long Potlife) is used for temperatures between +20°C and +40°C.
  • 1 15 16 17