Sikagard 62
Sikagard 62 is a two-component solvent free, high build coloured epoxy resin coating for steel or concrete with high chemical resistance and approved for use in contact with potable(drinking) water.
[logo_carousel_slider].
Sikagard 62 is a two-component solvent free, high build coloured epoxy resin coating for steel or concrete with high chemical resistance and approved for use in contact with potable(drinking) water.
Sikagard-63 N is a solvent free, two part epoxy resin coating. Abrasion resistant universal coating material designed for normal to highly aggressive chemical environments. For use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika-EpoCem), steel and aluminium.
Sikafloor 91 is a three component solvent free coloured high strength heavy duty epoxy resin floor screed which is also suitable as a patching and levelling compound.
Sikafloor-280 is a three part, solvent free epoxy mortar, consisting of an epoxy binder and quartz sand with a maximum grain size of 1.2 mm. All components are prebatched in the correct mixing ratio.
Coloured, textured roller coat for concrete and cement screeds with normal to medium heavy wear.
RonaFloor SL is a self-smoothing seamless epoxy resin flooring system. It combines good wear resistant properties with high chemical resistance and a smooth easy to clean gloss finish. Ronadeck SL floors are used in areas subject to foot and vehicle traffic in medium to heavy duty areas where decoration, durability and cleanliness are key requirements.
RonaFloor HB 100 and HB 200 are solvent free high build epoxy floor coatings for use on concrete, screeded and granolithic floors. They provide excellent abrasion and chemical resistance to floors subject to constant traffic. Two coats of Ronadeck HB 100 or HB 200 also provide an easy to clean gloss finish. Cured dry film thickness is between 0.1mm and 0.4mm depending on grade,
application rate and number of coats.
Ronadeck Epoxy Floor Mortar Standard and Rapid are high performance epoxy
resin mortars for repairing existing floors and providing new wearing surfaces in light and heavy traffic areas. Its formulation allows thin section application
down to 2mm and feather edge.
RonaDeck Resin Bound Surfacing is a resin bound aggregate surface for pedestrian and vehicle trafficked surfaces such as paths, walkways, pavements, patio areas, driveways, car park bays, small car parks. RonaDeck Resin Bound Surfacing is functional, highly decorative, can be laid without joints and is slightly flexible. It offers an attractive alternative to concrete, tarmac, block paving and resin bonded aggregate finishes such as RonaDeck Resin Bonded Surfacing.
NORTHERN DISTRIBUTION CENTRE
MIDLAND DISTRIBUTION CENTRE
SOUTHERN DISTRIBUTION CENTRE
© 2023 EPMS Supplies Ltd - All Rights Reserved - Privacy Policy - Terms Of Service - GDPR
This product has been added to your quote.
Click below to go to your quote page, or click ‘close’ to continue browsing.