.

Fosroc Thioflex 600

Adam Lowe

Multi-component, gun and pouring grade, polysulphide sealant for sealing movement joints in building and civil engineering structures, including superstructures, reservoirs, floors, basements and subways. Highways Agency – DTp Specification for highway works series 1000 clause 1017.

Fosroc Supercast SWX

Adam Lowe

Supercast SWX is a grey, elastomeric water-swellable paste which is applied like a sealant. The hydrophilic properties of Supercast SWX display good consistency in swell rate during repeated wet/dry cycling. Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water.

Fosroc Supercast Synkoflex FR

Adam Lowe

Supercast Synkoflex FR is a fuel-resistant, non-swelling preformed plastic adhesive waterstop of dimensions 12mm x 30mm. It can be laid onto fresh concrete, or applied to existing concrete when used in conjunction with Supastik E10 Adhesive.

Fosroc Supercast PVC Waterstops

Adam Lowe

Supercast waterstops are extruded from a high grade PVC compound which has been formulated to give excellent flexibility and longevity characteristics. They are available as straight lengths and factory produced intersections or as a factory prefabricated segment of a network to minimise site jointing.

Fosroc Renderoc MB50

Adam Lowe

Renderoc MB50 concrete reinstatement mortar is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, medium-weight repair mortar. It gives good handling characteristics while minimising water demand. The low water requirement ensures good strength gain and long-term durability.

Fosroc Renderoc Plug

Adam Lowe

Renderoc Plug is a rapid setting mortar which is easy to apply to horizontal, vertical or overhead surfaces at a wide range of thicknesses. There are two grades available: Renderoc Plug 1 with an initial set time of approximately 1 minute, and Renderoc Plug 20 with an initial set time of approximately 20 minutes.

Fosroc Renderoc RP252

Adam Lowe

Renderoc RP252 is supplied as a ready to use blend of dry powders and polymer emulsion which when mixed produce a highly consistent cementitious re-profiling and protection mortar. The product exhibits excellent thermal compatibility with concrete and is compatible with other Renderoc mortars and Dekguard coatings.

Fosroc Renderoc S

Adam Lowe

Renderoc S is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a highly consistent, high strength repair mortar. The material is polymer modified to provide a mortar with good handling characteristics, while minimising water demand. The hardened product exhibits excellent thermal compatibility with concrete and outstanding water repellent properties. The low water requirement ensures fast strength gain and long-term durability.

1 2 3 9