.

BASF Masterflow 648

Adam Lowe

MASTERFLOW® 648 CP PLUS Grout is manufactured from the highest quality epoxy resins and carefully graded high strength inert fillers. MASTERFLOW® 648 CP PLUS formulation incorporates the best features of the previous range of MASTERFLOW® epoxy grouts which have made them world leaders in heavy machinery grouting in harsh environments for over 40 years. (First installation 1956).High ultimate compressive, flexural and tensile strengths. Therefore able to withstand heavy static and dynamic loads

BASF Mastertop 524

Adam Lowe

MASTERTOP® 524 is a polymer modified shrinkage compensated, cementitious, self levelling floor screed in powder form requiring only the addition of water. The fluid consistency allows rapid installation rates and fine tolerances using mix and pump machines. Suitable for application depths between 2 – 25mm. Low odour formulation

BASF Masterseal 583

Adam Lowe

MASTERSEAL 583 is a blend of Portland cements, selected aggregates and spray dried polymer modifying agents. The aggregates are carefully graded. When mixed with clean water to a slurry consistency, MASTERSEAL 583 can be applied easily with a stiff hand brush, broom or spray equipment.

BASF Masterflow 885

Adam Lowe

MASTERFLOW® 885 is a ready to use product in powder form, which requires only the on-site addition of water to produce a non-shrink, metallic reinforced grout of predictable performance. Use of specially processed manageable metallic aggregate improves impact and dynamic loading resistance compared with normal cementitious grouts.

1 2 3