MasterEmaco T 545 is a one component concrete repair and anchoring material which sets in 15 minutes and will accommodate rubber-tyre traffic 45 minutes after placement. This product bonds to both concrete and masonry and can be used indoors and outdoors for highway and heavy industrial repair jobs.
MASTERSEAL® 303 is a single component clear, deeply penetrating water repellent used to protect both vertical and horizontal concrete surfaces from deterioration by atmospheric pollution, salt attack and freeze thaw cycles etc. Virtually no product evaporates during spray application, therefore more active silane can reach its intended target, so minimising wastage and maximising coverage.
MasterSeal 588 powder is a blend of Portland cements, selected silica sands and modifying agents. When mixed to a slurry consistency with MasterSeal 588 liquid, an acrylic polymer emulsion, it can be easily applied by brush, roller or spray equipment. It cures to give an elastomeric flexible membrane.
MASTERFLOW® 765 is a ready to use, non-shrink construction grout. It can be used as fluid or plastic consistencies for grouting of equipment and machinery, bearing pads, rails and anchoring. Non shrink for effective contact and support. High early strength for rapid installation and use of plant. Durable, uniform dense structure. Good workability into gap widths of down to 5mm for up to 1 hour at 20°C.
MasterEmaco T 1200 PG is a single component, fast setting and hardening pourable repair and bedding mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
MasterEmaco® T 1100 TIX, is a single component, fast setting and hardening thixotropic repair and bedding mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
MasterEmaco S 5450 PG is a single component, extra high strength, high modulus, and shrinkage compensated structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
MasterEmaco S 5400 is a single component, extra high-strength, high modulus, shrinkage compensated structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4.
MasterEmaco P 5000 active primer, not only reinstates a high pH environment it also contains active corrosion inhibiting additives for the protection of reinforcement steel.
MasterEmaco N 5200 is a universal, single component, polymer modified, fast setting, repair, reprofiling and levelling mortar that meets the requirements of the new European Norm EN 1504 part 3 class R2.
