Vertiseal is a gun grade, high performance polysulphide sealant for general civil and structural applications and is suitable for all types of joints in potable water retaining structures. Vertiseal is easy to apply and the reactor-in-base aids uniform dispersal during mixing. It can be used in wide joints up to 40mm.
Multi-component, gun and pouring grade, polysulphide sealant for sealing movement joints in building and civil engineering structures, including superstructures, reservoirs, floors, basements and subways. Highways Agency – DTp Specification for highway works series 1000 clause 1017.
Nitoseal PU12 is a two-part, elastomeric joint sealant based on polyurethane technology. It is supplied in packs containing base compound and curing agent in the correct proportions which, when mixed, cure to form a tough rubber-like material. Adhesion to most commonly used construction materials is excellent.
Nitoseal PU800 is a two-component gun grade elastomeric sealant for limited movement joints.
Colpor 200PF is For the sealing and maintenance of joints in concreteroads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and oil spillage might occur such as aircraft fuelling areas, oil terminals, garage forecourts, parking and cargo areas.
EUCO QWIKJOINT 200 is a fast-setting, semi-rigid polyurea used for filling control and construction joints in industrial concrete floors. EUCO QWIKjoint 200 represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. Among these benefits are a super-fast set time and an extended shave time: EUCO QWIKjoint 200 can be trimmed flush with the floor immediately after placement or up to 24 hours later. EUCO QWIKjoint 200 supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges.
EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyureathane, primarily used for filling construction and control joints in industrial and commercial concrete floors.
