Cemprotec Elastic is a cementitious modified, polymer rich coating which maintains its elastomeric properties even under immersed conditions. It is ideally suited for waterproofing and protecting concrete and masonry structures which are exhibiting cracking where further movement is expected. Typical applications include treatment of water towers and tanks, roofs of reservoirs and surfaces in contact with potable water
Cemprotec E942 is a two component, water based, epoxy and cementitious modified polymer coating for the protection of concrete and ferrous metals. These components chemically combine to give a hard, durable coating with excellent resistance to water, chloride ions, oxygen and aggressive chemicals for the protection of steel and concrete in the most demanding environments.
Cementitous Coating 851 is a two component, thixotropic, cementitious modified polymer coating with high adhesion to both steel and concrete. Cementitous Coating 851 forms a hard, highly alkaline coating with a degree of elasticity which not only protects the concrete, or other substrates, from the effects of aggressive acid gases, moisture and chlorides, but also has greatly enhanced chemical resistance.
MASTERSEAL® F1131 is a water based coating based on acrylic polymers. This one-component emulsion cures to a crack-bridging, protective, carbonation inhibitor and weather proof coating with a smooth decorative finish. Solvent-free
MASTERSEAL® F1120 is a single component coating, based on water dispersion acrylic polymers. This emulsion is suitable as a smooth and protective finish resistant against weathering. For inside and outside, above ground level.
MASTERSEAL® 303 is a single component clear, deeply penetrating water repellent used to protect both vertical and horizontal concrete surfaces from deterioration by atmospheric pollution, salt attack and freeze thaw cycles etc. Virtually no product evaporates during spray application, therefore more active silane can reach its intended target, so minimising wastage and maximising coverage.
Sikalastic®-618 is a one-component, cold applied, moisture-triggered polyurethane membrane. It cures to form a seamless and durable waterproofing solution for exposed roof areas and structures.
Sikagard®-203 W is a single component, coloured, waterborne modified acrylic resin based intermediate and surface coating containing an organic, in-film preservative.
Sikafloor®-400 N Elastic is a one part, highly elastic, solvent containing, UV resistant, coloured, moisture curing polyurethane resin coating.
