Newton 309-M Adhesive Mastic

Adam Lowe

Newton 309-M Adhesive is an MS-polymer based, durable and fast curing elastic adhesive. Newton 309-M Adhesive has a very high initial strength and bonds without primer on almost all materials used in the construction industry, such as aluminium, galvanized and stainless steel, zinc, copper, natural stone, concrete, brick, cement based cover sheeting, HPL panels, treated wood, gypsum, glass, glazing, and various synthetic materials.

Newton 315 Polymer-Waterbar

Adam Lowe

Newton 315 Polymer-Waterbar is a hydrophilic, acrylate polymer waterbar, which swells when activated by moisture. It is characterised by high elasticity and high tensile strength. Newton 315 Polymer-Waterbar can be used to seal the structure against water leaks to cast-in-place concrete construction joints. The swelling is achieved through hydrophilic acrylate polymers, which are inseparably embedded within the butylene carrier material . This results in high elasticity and exceptional tensile strength, even when fully expanded within the joint. Due to its high resistance to acids, alkalis and organic solutions, Newton 315 Polymer-Waterbar can be used to seal joints where aggressive water is expected such as within sewage treatment plants, biogas plants and liquid waste holding tanks.


Adam Lowe

PU H100 is a phthalate free, solvent free, closed cell, hydrophobic polyurethane chemical grout designed to shut off gushing leaks in a wide range of waterproofing and consolidation applications. PU H100 is environmentally friendly and resistant to biological attack.

Fosroc Supercast Synkoflex FR

Adam Lowe

Supercast Synkoflex FR is a fuel-resistant, non-swelling preformed plastic adhesive waterstop of dimensions 12mm x 30mm. It can be laid onto fresh concrete, or applied to existing concrete when used in conjunction with Supastik E10 Adhesive.

Fosroc Supercast PVC Waterstops

Adam Lowe

Supercast waterstops are extruded from a high grade PVC compound which has been formulated to give excellent flexibility and longevity characteristics. They are available as straight lengths and factory produced intersections or as a factory prefabricated segment of a network to minimise site jointing.

Fosroc Renderoc Plug

Adam Lowe

Renderoc Plug is a rapid setting mortar which is easy to apply to horizontal, vertical or overhead surfaces at a wide range of thicknesses. There are two grades available: Renderoc Plug 1 with an initial set time of approximately 1 minute, and Renderoc Plug 20 with an initial set time of approximately 20 minutes.

1 2