weber.tec anchor grout is a three-component polyester resin and special catalysed filler that has been developed for anchoring and fixing. The pourable grout is suited for pouring into holes for anchors in floors and slabs. weber.tec anchor grout rapid is available for cold weather working.
weber.tec EP pourable grout is specially formulated from epoxy resin and graded aggregates producing materials with exceptional toughness chemical resistance good flow characteristics and negligible shrinkage.
weber.tec EP TAG is a specially formulated epoxy resin system for securing horizontal fixings such as dowel bars starter bars threaded studding and bolts into concrete or brickwork. A high strength corrosion and chemically resistant anchoring is obtained where speed of installation and early application of load is required. The thixotropic nature of the material ensures that the mixed resin stays in the hole after injection
Five Star grout is a premixed cementitious grout developed for applications where an economical grout with good flow and strength is required. It is based on specially selected Portland cements graded aggregates and admixtures including a special form of carbon. This special formulation produces a grout which conforms to ATSM C827 Early volume Change of Cementitious Mixtures. It does not contain iron aluminium or other additives which produce non-shrink characteristics by chemical reaction. This eliminates any subsequent problems of dimensional instability corrosion or staining. Five Star grout is designed primarily as a flowing grout but can also be used at a trowellable or dry pack consistency.
Five Star grout SP is a premixed cementitious grout similar to standard Five Star grout developed for applications where economical grout with good flow and retention of flow and higher strengths are required. It is designed primarily as a flowing grout but can be used at a trowellable consistency.
SikaGrout®-3200 is a 1-part, high performance cementitious grout for under grouting wind turbine foundation base plates. The product is shrinkage compensated and has high early and final strength performance properties validated by fatigue testing.
SikaGrout 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout.
Sika L2 High Flow is a one part, high flow, rapid strength cementitious grout.For precision, high performance, grouting underneath machine bases, structural steelwork, etc
Solvent and styrene free methacrylate based two part polyester anchoring adhesive. fast curing.
Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be installed after 24 hours with natural stone installation possible after 2 days. Requires the addition of aggregates and water.
