BETEC® NSM mortars are a range of technically advanced, single component, cementitious repair mortars that are fibre-reinforced and polymer-modified The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar.
This is a ready to use powder premix comprising cement, selected particle size quartz, synthetic resins and special additives. Betec Seal is mixed with water using a slow speed drill and paddle to form a smooth slurry. The slurry is applied by brush or trowel, in two or three coats, to horizontal and vertical surfaces and dries to form a hard, durable, waterproof cementitious coating.
High density, compressible closed cell polyethylene filler for movement joints in cicil/structural works and water retaining structures.
BETEC®350 is a single component cementitious compound which is polymer modified and fibre reinforced. It is a rapid setting, high strength, waterproof compound used to seal tieholes that are created by formwork tie bars.
A conformable, swellable polymer/butyl rubber waterstop strip that expands in contact with water. When fully encapsulated by poured concrete, the expansive forces form a seal against concrete faces. The seal resists hydrostatic pressure, stopping water from entering sub structures.
BETEC® NSM mortars are a range of technically advanced, single component, cementitious repair mortars that are fibre reinforced and polymer modified The incorporation of plastic fibres minimises the risk of shrinkage cracking and the polymers ensure density and durability in the hardened mortar.
Bituthene® Liquid Membrane is designed to complement GCP Servicised®sheet systems where liquid applied waterproofing is necessary to ensure watertight continuity. Bituthene Liquid Membrane cures to form a tough seamless rubber like waterproof layer. Typical details suitable for Bituthene Liquid Membrane are: curved, irregular or stepped profiles, pile penetrations, internal corners, flashings round drains, gullies or pipe entries and edge sealing at terminations.
Low density, compressible joint polyethylene joint filler for structural expansion joints and building facades.
Servijoint One DW is a cold-applied, one part polyurethane sealant developed for critical joints in reservoirs containing potable water and is UK Water Byelaws Scheme listed. Servijoint One DW provides a durable, damage resistant surface sealant to protect steel reinforcement in concrete structures from corrosion. Servijoint One DW is also suitable for factory floors, culverts, spillways and car park decks.
