.

Visqueen Vapour Check

Adam Lowe

Visqueen Vapour Check is used to omit the risk of interstitial condensation within a structure as well as improving the airtightness of the building. Visqueen Vapour Check restricts the passage of warm, moist air from within the building from permeating into the structure or the roof. Visqueen Vapour Check is manufactured using virgin polyethylene.

Visqueen Ultimate HC Blok

Adam Lowe

Visqueen Ultimate HC BLOK is a highly flexible 0.5mm thick coextruded membrane designed to comply with current guidance on Volatile Organic Compounds (VOCs) vapours and ground gases. Manufactured using Visqueen’s advanced membrane technology and drawing on our extensive knowledge and expertise in gas protection, Visqueen has developed a new flexible barrier membrane suitable in brownfield applications that are affected by aggressive chemicals (vapour phase) such as such as Naphthalene, Benzene, Toluene, Ethyl Benzene and Xylene (BTEX).

Visqueen Fully Bonded Vapour Barrier

Adam Lowe

Visqueen Fully Bonded (FB) Vapour Barrier is used to omit the risk of interstitial condensation within a structure as well as improving the general airtightness of the building. Visqueen FB Vapour Barrier restricts the passage of warm, moist air from within the building from permeating into the structure or the roof. It is commonly used within timber frame housing as well as commercial buildings.

Visqueen Radon Membrane

Adam Lowe

Visqueen High Performance Radon Membrane is an LDPE un-reinforced membrane. Visqueen High Performance Radon Membrane™ is suitable for use in concrete floors not subject to hydrostatic pressure, in accordance with the relevant clauses of IS 325:Part 2:1995 and of BS CP 102:1973 Code of Practice for protection of buildings against water from the ground. The product can be installed as an over-site membrane, either between a sand blinded hardcore (50mm of sand minimum) bed and the base concrete, or layered on top of high-density insulation (25kg/m3) with a concrete screed layered over it.

Visqueen Gas Resistant Self Adhesive Membrane

Adam Lowe

Visqueen Gas Resistant (GR) Self Adhesive Membrane is designed to prevent the transmission of carbon dioxide, radon and methane gases in tanking applications or where hydrostatic pressure is present. Resistance to gas is achieved by an integral aluminium film.

Visqueen Low Permeability Gas Membrane

Adam Lowe

Visqueen Low Permeability Gas Membrane is a robust co-polymer thermoplastic membrane approved for use in NHBC Amber 1 and Amber 2 applications. Ffor ease of identification on site the membrane is coloured yellow. The membrane is supplied in 4m x 12.5m roll. It is flexible and is easy to install, and is also suitable for use as a damp proof membrane.

Visqueen Gas Resistant DPC

Adam Lowe

Visqueen Gas Resistant (GR) Damp Proof Course is a flexible polyethylene DPC with an aluminium foil designed to prevent the transmission of carbon dioxide, radon, methane and low level hydrocarbon vapours. This is in addition to the products usage as a damp proof course. Resistance to harmful gases is achieved by an integral aluminium film.

Visqueen Gas Barrier

Adam Lowe

Visqueen Gas Barrier is a multi-layer reinforced polyethylene membrane with an integral aluminium foil that is approved for use in NHBC Amber 2 applications. For ease of identification on site Visqueen Gas Barrier is coloured blue on one side and silver on the reverse. The barrier combines strength and performance with flexibility and easy installation. Visqueen Gas Barrier also acts as a damp proof membrane.

1 2 3