Very low emission cement based self-levelling com- pound suitable for interior areas. Sikafloor®-100 Level is characterised by good working properties. Suitable for castor chair rollers according to EN 12 529.
MASTERTOP® 524 is a polymer modified shrinkage compensated, cementitious, self levelling floor screed in powder form requiring only the addition of water. The fluid consistency allows rapid installation rates and fine tolerances using mix and pump machines. Suitable for application depths between 2 – 25mm. Low odour formulation
Sophisticated self-levelling sub-floor smoothing compound, can be applied to any thickness by trowel or pump. Even thick applications will be ready to receive floorcoverings within 24 hours at 20°C
ARDEX K 301 Exterior Self-Smoothing Levelling and Resurfacing Compound is a special fast setting cement-based product designed to smooth and level rough and damaged concrete surfaces in external and internal situations. ARDEX K 301 is a grey powder consisting of special cements, graded aggregates and high quality synthetic resins. When mixed with water, a fluid mortar is produced which sets within 2 hours and can normally be walked on after approximately 2-3 hours at 20°C. ARDEX K 301 can be applied from 2mm to 20mm in thickness. The set and hardened ARDEX K 301 is usually ready to receive light wheeled traffic after 48 hours at 20°C
Rapid hardening and drying cement for floor screeds. Used in place of Portland Cement in cement/sand screeds. ARDEX A 35 produces a floor screed that can be walked on after 3 hours and is dry enough to receive floor coverings after 24 hours regardless of screed thickness or 4 hours when smoothed with ARDEX A 55. After 1 day the compressive and tensile strengths of an ARDEX A 35 screed exceed the acceptable minimum attained by a conventional screed after 28 days.
Rapid settingn and hardening external repair mortar. For infilling holes around fittings and for patch work on wall and floor areas. Rapid hardening – walkable in 2-3 hours. For repairing stair treads and risers. To produce gradients for ramps. To smooth wall and floor areas from 2 to 30mm thick Easy to smooth and float. Stress and crack free. Wearing surface in lightly trafficked areas. Ideal for patch repairs prior to the application of suitable damp proof membranes.
Rapid drying pre-blended screeding and screed repair mortar. Cement and sand included – just add water. For new screeds or repairs to existing screeds Rapid hardening – walkable in 3 hours. Rapid drying – receives floorcoverings after 24 hours or 4 hours, when smoothed with ARDEX A 55, regardless of thickness. Conforms to EN13813 CT-C35-F6. Test with BRE screed tester after 6 hours. Apply as bonded, unbonded or floating screed. Rapid strength development. Rapid Formula.
ARDITEX NA is a self-smoothing, protein free latex levelling compound with improved flow and excellent adhesion, flexibility and water resistance.These unique properties ensure that ARDITEX NA can be used with confidence over most old adhesive residues and is suitable to receive most floorcoverings after only 4 hours
