Ronafix is a single part modified styrene butadiene liquid additive for cement mortars which enhances physical and chemical properties, allows mortars to be placed in thin section, provides waterproofing and resistance to frost and promotes adhesion to building surfaces.
RonaBond Concrete Cover Elastic is a coating designed to improve equivalent concrete cover to reinforcement. A 2mm layer provides 150mm equivalent concrete cover providing corrosion protection to steel reinforcement thus extending the life of the concrete.
Ronabond Lightweight Repair Mortar is a prepacked mortar used for repairing
concrete on vertical and overhead surfaces where ease of application is as important as high strength. It can be applied in relatively thick section to walls and soffits and, depending on the nature of the repair, in layers up to 75mm deep in pocket repairs.
RonaBond HB25 is a prepacked mortar used for repairing concrete on vertical and overhead surfaces where ease of application is as important as high strength. It can be applied in relatively thick section to walls and soffits and, depending on the nature of the repair, in layers up to 75mm deep in pocket repairs.
Ronabond Concrete Repair Mortar is a prepacked, ready to use
mortar for concrete repair and is used with Ronabond Primer which
gives monolithic adhesion to all correctly prepared surfaces.
Ronabond Concrete Repair Mortar is used to repair and replace
concrete damaged as a result of spalling through reinforcement
corrosion, freeze/thaw cycling, impact or other damage.
RonaFloor Repair 1 Hour is a range of mortars and fine concretes designed for
rapid strength gain and low temperature use. Within one hour of mixing
(depending on temperature) the material will have gained sufficient strength
to take foot and vehicle traffic including cars, lorries, fork trucks and other
machinery.
The speed of RonaFloor Repair 1 Hour makes it ideal for use on roads,
motorways, slipways and ramps, tidal areas, airports and stations, in factories,
warehouses and goods depots and in all other areas where speed and rapid
strength gain is of paramount importance. After just one hour of mixing a
surface repaired with RonaFloor Repair 1 Hour or a component bedded on
RonaFloor Repair 1 Hour can be opened to foot and vehicle traffic.
As well as achieving rapid strength RonaFloor Repair 1 Hour also works at low
temperatures when conventional mortars cannot be used.
Ronabond Flowable Micro Concrete is a repair concrete used in place of hand applied mortars to repair and replace sections of concrete. Designed for pour and pump application the material is poured in to shuttering to reform concrete profiles. It is shrinkage compensated and provides high early and ultimate strengths. Flow is affected by temperature.
RonaBond Easy Skim FC is a prepacked polymer modified mortar which is applied as a skim coat in thicknesses up to 3mm to provide a smooth, hard finish to damaged, blemished and repaired concrete surfaces.
RonaBond Easy Skim FC is also used as a levelling mortar prior to the application of protective coatings and paints. It can also be used to give a harder than plaster finish to walls. The material can be mixed by hand or machineRonaBond Easy Skim FC is a prepacked polymer modified mortar which is applied as a skim coat in thicknesses up to 3mm to provide a smooth, hard finish to damaged, blemished and repaired concrete surfaces.
RonaBond Easy Skim FC is also used as a levelling mortar prior to the application of protective coatings and paints. It can also be used to give a harder than plaster finish to walls. The material can be mixed by hand or machine
The Ronabond HB40 range of concrete repair and render materials comprises
two prepacked mortars, and a slurry coat for surface finishing prior to
coating.The Ronabond HB40 range of concrete repair and render materials comprises
two prepacked mortars, and a slurry coat for surface finishing prior to
coating.
