Concrete Repairs

Sikagard ElastoColor-675 W is a one part, plasto-elastic water dispersed coating based on a styrene acrylate dispersion for the protection and enhancement of fairfaced concrete. Sikagard ElastoColor-675 W can be applied over existing coatings or directly onto the concrete surfaces.

Sikagard-552 W Aquaprimer is a one part water dispersed adhesion promoting primer for water dispersed polymer paint coatings. Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and thin rendering such as Sika® MonoTop®-620, Icoment-520 etc

Sikagard-551 S Elastic Primer is a one part, solvent containing primer for very dense or very porous concrete surfaces and/or difficult application conditions. can also be used as primer on firmly adhering existing solvent based coatings

Sikagard-550 W Elastic is a one part, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C.

Sikagard-545 W Elastofill is designed as a crack-bridging intermediate coat in combination with Sikagard-550 W Elastic. Sikagard-545 W Elastofill as a filler coat closes pores, cavities and blow holes

Sikafloor® Level -30 is a polymer modified, pumpable, self levelling fast drying cementitious screed for higher thickness interior or outdoor floors, meeting the requirements of class R3 according to EN 1504 – 3.

Sikadur®-Combiflex® CF Adhesive Type N is a thixotropic two part adhesives based on epoxy resins and fillers. The Sikadur-Combiflex CF Adhesive Type N is part of the Sikadur®-Combiflex® System and used to glue the Sikadur®-Combiflex® Tape or the Sikadur®-Hypalon Strip to different substrates.

Sikadur 41 CF Rapid is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +5°C and +20°C.

Sikadur 41 CF Normal is a solvent-free, thixotropic, three part patching and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.