.

Newton 203-RM

Adam Lowe

Newton 203-RM is a single-component, fast-setting, Portland cement-based structural mortar, used primarily for the durable repair of concrete. Setting in just 10 minutes at 20ºC, Newton 203-RM is ideal for areas that cannot be taken out of service for long periods, or where the concrete is subjected to heavy wear such as roads, runways, bridges, decks, floors and footpaths. Polymer-modified, and fibre-reinforced, Newton 203-RM is physically and chemically compatible with the host concrete, quickly exhibiting high adhesive and compressive strength. As a single component, requiring only the addition of water, the resulting mortar is rapid curing with enhanced polymeric properties and reliable strength development which is not significantly affected by low temperature use. The mortar can be used as supplied up to 100 mm deep, or bulked out with clean, washed, sharp sand to form a high performance screed or for floor or deck repairs up to maximum depth of 300 mm.

Weber.tec-EP-Bonding-Aid

Adam Lowe

weber.tec bonding aid EP is a high-build epoxy resin for priming epoxy repair mortars for bonding to concrete and masonry structures. Exceptional bond to vertical and soffit applications for priming lightweight repair mortars. It may also be used to bond freshly-mixed cementitious concrete mortars and renders to existing sound concrete substrates.

Weber.tec-EP-Mortar

Adam Lowe

weber.tec EP mortar is available as a three-component bulk pack or as a two-component handy pack consisting of epoxy resin hardener and selected graded aggregates (filler) which where mixed produce a high strength impermeable and chemically resistant mortar.

Weber.cote-Smooth

Adam Lowe

weber.cote smooth coating system provide excellent anti-carbonation protection with a minimum 15 years life expectancy. Weber.cote smooth is both protective and decorative while weber.cote clear protects concrete surfaces without significantly altering their appearance

Weber.cem-Spray-CP

Adam Lowe

weber.cem spray CP is a ready to use cement based concrete mix. It contains inert limestone aggregates and dust suppressants. The formulation has been designed specially for dry process spray application to give high strength reduce rebound and maximise application thickness. It has low resistivity which makes it suitable for application to structures which receive cathodic protection.

Weber.cem-Spray-DS-DSF

Adam Lowe

weber.cem spray DS is a ready to use polymer-modified cement based concrete mix. It contains inert limestone aggregates and dust suppressants. The formulation has been designed specially for dry process spray application to give high early strength reduced rebound and maximise application thickness.

Weber.cem-Spray-RS

Adam Lowe

weber.cem spray RS is a ready to use polymer modified dry sprayed concrete able to achieve early set ideal for permanent concrete repairs where time constraints demand early strength gain. The material contains inert limestone aggregates dust suppressants and accelerators. The formulation is designed for dry spray process method of application with reduced rebound and maximum applied thickness.

1 2 3 18