Visqueen Urban Drainage Geomembrane is a UK manufactured membrane using high performance polymers, suitable for underground stormwater storage systems and also for permeable paving systems.
Visqueen High Performance Radon Membrane is an LDPE un-reinforced membrane. Visqueen High Performance Radon Membrane™ is suitable for use in concrete floors not subject to hydrostatic pressure, in accordance with the relevant clauses of IS 325:Part 2:1995 and of BS CP 102:1973 Code of Practice for protection of buildings against water from the ground. The product can be installed as an over-site membrane, either between a sand blinded hardcore (50mm of sand minimum) bed and the base concrete, or layered on top of high-density insulation (25kg/m3) with a concrete screed layered over it.
Visqueen Self Adhesive Membrane is a self adhesive waterproofing system. It can be used as a tanking or damp proof membrane for both horizontal and vertical applications. Visqueen Self Adhesive Membrane has BBA Accreditation, Certificate No. 12/4924. Visqueen Self Adhesive Membrane prevents the ingress of water and associated water-borne alkalis present in some mortar and concrete. Visqueen Self Adhesive Membrane should be used along with Visqueen HP Tanking Primer for application on touch dry concrete or masonry. Substrates should be primed with Visqueen HP Tanking Primer prior to application.
Visqueen TorchOn Tanking Membrane is a robust waterproofing membrane, used for heavy duty tanking and gas proofing applications. It can be used both vertically and horizontally above and below ground level to prevent the ingress of water. Visqueen TorchOn Tanking Membrane should be used with Visqueen HP Tanking Primer on touch dry concrete. Substrates should be primed with Visqueen HP Tanking Primer prior to application. Visqueen TreadGUARD1500 should be used horizontally or for external vertical applications Visqueen Protect&Drainshould be used to protect the membrane from backfill or site traffic.
Visqueen Protect & Drain consists of a geotextile filter membrane thermally bonded to a cuspated HDPE core. The product is 6mm thick and supplied in easy to handle rolls: 0.97m x 25m.
Visqueen Polyethylene DPC is designed to prevent the passage of moisture in brick and block work from external sources. Visqueen Polyethylene DPC is manufactured from high quality reprocessed materials to provide a cost effective and durable domestic grade DPC.
Visqueen Gas Resistant (GR) Self Adhesive Membrane is designed to prevent the transmission of carbon dioxide, radon and methane gases in tanking applications or where hydrostatic pressure is present. Resistance to gas is achieved by an integral aluminium film.
Using the latest Zedex technology, Visqueen High Performance Urban Drainage Geomembrane is flexible, has high puncture resistance and suitable for non-smooth surfaces and factory prefabrication to optimise on site installation. The product is black in colour, 1mm thick and supplied in an easy to handle roll size of 1.4m x 50m. Visqueen High Performance Urban Drainage Geomembrane is a catagory 2 impermeable membrane under BS 7533 part 13.
Visqueen High Performance (HP) Vapour Barrier is used to omit the risk of interstitial condensation within a structure as well as improving the general airtightness of the building. Visqueen HP Vapour Barrier restricts the passage of warm, moist air from within the building from permeating into the structure or the roof. It is commonly used within timber frame housing as well as commercial buildings. Visqueen HP Vapour Barrier is a high quality multi layer reinforced LDPE membrane with an aluminium core.
Visqueen Low Permeability Gas Membrane is a robust co-polymer thermoplastic membrane approved for use in NHBC Amber 1 and Amber 2 applications. Ffor ease of identification on site the membrane is coloured yellow. The membrane is supplied in 4m x 12.5m roll. It is flexible and is easy to install, and is also suitable for use as a damp proof membrane.
