[logo_carousel_slider].

Fosroc Nitoseal MS300

Adam Lowe

Nitoseal MS300 is suitable for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. Factory floors Sports stadia terracing Shopping centres Warehouse and distribution depots

Fosroc Nitoseal MS600

Adam Lowe

Nitoseal MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer. Conforms to the Water Supply (water quality) Regulations 2000 and 2001 Regulations 31(4b) for products having a small surface area in contact with water for public supply.

Fosroc Nitoseal PU12

Adam Lowe

Nitoseal PU12 is a two-part, elastomeric joint sealant based on polyurethane technology. It is supplied in packs containing base compound and curing agent in the correct proportions which, when mixed, cure to form a tough rubber-like material. Adhesion to most commonly used construction materials is excellent.

Fosroc Nitoseal MS100

Adam Lowe

Nitoseal MS100 has been formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting. Advantages ?? Will not stain masonry, marble or other surfaces.

Fosroc Nitoseal MB77

Adam Lowe

Nitoseal hot-pour sealants are available in a choice of two grades: Nitoseal MBN2 Complies with BS 2499 :1993. A low extension grade for sealing joints in concrete pavements, etc. Nitoseal MB77 A hard grade for sealing low movement joints in factory floors and areas where joints are closely spaced and resistance to grit and traffic is of prime importance.

EUCO Qwikjoint UVR

Adam Lowe

EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product. It is a fast-setting, semi-rigid polyureathane, primarily used for filling construction and control joints in industrial and commercial concrete floors.

EUCO Qwikjoint 200

Adam Lowe

EUCO QWIKJOINT 200 is a fast-setting, semi-rigid polyurea used for filling control and construction joints in industrial concrete floors. EUCO QWIKjoint 200 represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. Among these benefits are a super-fast set time and an extended shave time: EUCO QWIKjoint 200 can be trimmed flush with the floor immediately after placement or up to 24 hours later. EUCO QWIKjoint 200 supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges.

1 2