Cemprotec Levelling Coat is a two component epoxy and cementitious modified polymer screed for levelling concrete substrates in trafficked areas prior to the application of Cemprotec E-Floor.It is specially formulated to harden rapidly to form a durable surface, which can typically be overcoated within 24 hours.
Cemprotec EF Primer is a modified, styrene acrylic copolymer impregnant with high penetration, to stabilise and seal cementitious and asphalt floors prior to the application of the Cemprotec range of cementitious coatings and mortars.
Cemprotec E-Floor HB is a two component epoxy and cementitious modified polymer topping for the protection of concrete floors in demanding environmental conditions.
Cemprotec Clutch Filler is a two component, water based, epoxy and cementitious modified polymer mortar for sealing the interlock or clutch between sheet piles. It incorporates advanced cement chemistry, microsilica, fibre, epoxy and styrene acrylic copolymer technology to provide multi-functional protection with enhanced chemical resistance. When mixed, it can be applied with a pointing gun exhibiting a high degree of thixotropy to enable ease of application and filling of the void without sagging. It is specially formulated to chemically accelerate the passivation of ferrous metals even in the presence of chlorides and give maximum adhesion to steel.
Bonding Bridge 842 is an advanced polymer modified, cementitious, surface impregnant with high penetration of concrete. Bonding Bridge 842 further increases the adhesion of Flexcrete repair mortars and prevents rapid drying at the repair/concrete interface on porous backgrounds with high suction.
Cementitous Coating 851 is a two component, thixotropic, cementitious modified polymer coating with high adhesion to both steel and concrete. Cementitous Coating 851 forms a hard, highly alkaline coating with a degree of elasticity which not only protects the concrete, or other substrates, from the effects of aggressive acid gases, moisture and chlorides, but also has greatly enhanced chemical resistance.
Cemprotec E-Floor is a two component epoxy and cementitious modified polymer coating for the protection of concrete floors in demanding environmental conditions.
Flexcrete Bond Primer is a two component, water based product consisting of a pre-reacted epoxy resin dispersed in water (Part A) and a waterborne modified polyamine solution (Part B). When mixed it produces a slightly viscous, milky green dispersion for application by brush, roller or airless spray to prime and stabilise a wide range of building substrates prior to the application of specialist membranes and sealants in the Flexcrete range. It cures to form a clear film with a green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
POWERFUL SURFACE TREATMENT FOR NEUTRALISING ACTIVE MOULD, FUNGAL AND BACTERIAL GROWTH PRIOR TO THE APPLICATION OF PRODUCTS IN THE FLEXCRETE RANGE.
